Package org.jsoup

Interface Connection

All Known Implementing Classes:
HttpConnection
public interface Connection
The Connection interface is a convenient HTTP client and session object to fetch content from the web, and parse them into Documents.

To start a new session, use either Jsoup.newSession() or Jsoup.connect(String). Connections contain Connection.Request and Connection.Response objects (once executed). Configuration settings (URL, timeout, useragent, etc) set on a session will be applied by default to each subsequent request.

To start a new request from the session, use newRequest().

Cookies are stored in memory for the duration of the session. For that reason, do not use one single session for all requests in a long-lived application, or you are likely to run out of memory, unless care is taken to clean up the cookie store. The cookie store for the session is available via cookieStore(). You may provide your own implementation via cookieStore(java.net.CookieStore) before making requests.

Request configuration can be made using either the shortcut methods in Connection (e.g. userAgent(String)), or by methods in the Connection.Request object directly. All request configuration must be made before the request is executed. When used as an ongoing session, initialize all defaults prior to making multi-threaded newRequest()s.

Note that the term "Connection" used here does not mean that a long-lived connection is held against a server for the lifetime of the Connection object. A socket connection is only made at the point of request execution (execute(), get(), or post()), and the server's response consumed.

For multi-threaded implementations, it is important to use a newRequest() for each request. The session may be shared across threads but a given request, not.

  • Method Details

    • newRequest

      Connection newRequest()
      Creates a new request, using this Connection as the session-state and to initialize the connection settings (which may then be independently on the returned Connection.Request object).
      Returns:
      a new Connection object, with a shared Cookie Store and initialized settings from this Connection and Request
      Since:
      1.14.1

    • url

      Connection url​(URL url)
      Set the request URL to fetch. The protocol must be HTTP or HTTPS.
      Parameters:
      url - URL to connect to
      Returns:
      this Connection, for chaining

    • url

      Connection url​(String url)
      Set the request URL to fetch. The protocol must be HTTP or HTTPS.
      Parameters:
      url - URL to connect to
      Returns:
      this Connection, for chaining

    • proxy

      Connection proxy​(@Nullable Proxy proxy)
      Set the proxy to use for this request. Set to null to disable a previously set proxy.
      Parameters:
      proxy - proxy to use
      Returns:
      this Connection, for chaining

    • proxy

      Connection proxy​(String host, int port)
      Set the HTTP proxy to use for this request.
      Parameters:
      host - the proxy hostname
      port - the proxy port
      Returns:
      this Connection, for chaining

    • userAgent

      Connection userAgent​(String userAgent)
      Set the request user-agent header.
      Parameters:
      userAgent - user-agent to use
      Returns:
      this Connection, for chaining
      See Also:
      HttpConnection.DEFAULT_UA

    • timeout

      Connection timeout​(int millis)
      Set the total request timeout duration. If a timeout occurs, an SocketTimeoutException will be thrown.

      The default timeout is 30 seconds (30,000 millis). A timeout of zero is treated as an infinite timeout.

      Note that this timeout specifies the combined maximum duration of the connection time and the time to read the full response.

      Parameters:
      millis - number of milliseconds (thousandths of a second) before timing out connects or reads.
      Returns:
      this Connection, for chaining
      See Also:
      maxBodySize(int)

    • maxBodySize

      Connection maxBodySize​(int bytes)
      Set the maximum bytes to read from the (uncompressed) connection into the body, before the connection is closed, and the input truncated (i.e. the body content will be trimmed). The default maximum is 2MB. A max size of 0 is treated as an infinite amount (bounded only by your patience and the memory available on your machine).
      Parameters:
      bytes - number of bytes to read from the input before truncating
      Returns:
      this Connection, for chaining

    • referrer

      Connection referrer​(String referrer)
      Set the request referrer (aka "referer") header.
      Parameters:
      referrer - referrer to use
      Returns:
      this Connection, for chaining

    • followRedirects

      Connection followRedirects​(boolean followRedirects)
      Configures the connection to (not) follow server redirects. By default this is true.
      Parameters:
      followRedirects - true if server redirects should be followed.
      Returns:
      this Connection, for chaining

    • method

      Connection method​(Connection.Method method)
      Set the request method to use, GET or POST. Default is GET.
      Parameters:
      method - HTTP request method
      Returns:
      this Connection, for chaining

    • ignoreHttpErrors

      Connection ignoreHttpErrors​(boolean ignoreHttpErrors)
      Configures the connection to not throw exceptions when a HTTP error occurs. (4xx - 5xx, e.g. 404 or 500). By default this is false; an IOException is thrown if an error is encountered. If set to true, the response is populated with the error body, and the status message will reflect the error.
      Parameters:
      ignoreHttpErrors - - false (default) if HTTP errors should be ignored.
      Returns:
      this Connection, for chaining

    • ignoreContentType

      Connection ignoreContentType​(boolean ignoreContentType)
      Ignore the document's Content-Type when parsing the response. By default this is false, an unrecognised content-type will cause an IOException to be thrown. (This is to prevent producing garbage by attempting to parse a JPEG binary image, for example.) Set to true to force a parse attempt regardless of content type.
      Parameters:
      ignoreContentType - set to true if you would like the content type ignored on parsing the response into a Document.
      Returns:
      this Connection, for chaining

    • sslSocketFactory

      Connection sslSocketFactory​(SSLSocketFactory sslSocketFactory)
      Set custom SSL socket factory
      Parameters:
      sslSocketFactory - custom SSL socket factory
      Returns:
      this Connection, for chaining

    • data

      Connection data​(String key, String value)
      Add a request data parameter. Request parameters are sent in the request query string for GETs, and in the request body for POSTs. A request may have multiple values of the same name.
      Parameters:
      key - data key
      value - data value
      Returns:
      this Connection, for chaining

    • data

      Connection data​(String key, String filename, InputStream inputStream)
      Add an input stream as a request data parameter. For GETs, has no effect, but for POSTS this will upload the input stream.
      Parameters:
      key - data key (form item name)
      filename - the name of the file to present to the remove server. Typically just the name, not path, component.
      inputStream - the input stream to upload, that you probably obtained from a FileInputStream. You must close the InputStream in a finally block.
      Returns:
      this Connections, for chaining
      See Also:
      if you want to set the uploaded file's mimetype.

    • data

      Connection data​(String key, String filename, InputStream inputStream, String contentType)
      Add an input stream as a request data parameter. For GETs, has no effect, but for POSTS this will upload the input stream.
      Parameters:
      key - data key (form item name)
      filename - the name of the file to present to the remove server. Typically just the name, not path, component.
      inputStream - the input stream to upload, that you probably obtained from a FileInputStream.
      contentType - the Content Type (aka mimetype) to specify for this file. You must close the InputStream in a finally block.
      Returns:
      this Connections, for chaining

    • data

      Connection data​(Collection<Connection.KeyVal> data)
      Adds all of the supplied data to the request data parameters
      Parameters:
      data - collection of data parameters
      Returns:
      this Connection, for chaining

    • data

      Connection data​(Map<String,​String> data)
      Adds all of the supplied data to the request data parameters
      Parameters:
      data - map of data parameters
      Returns:
      this Connection, for chaining

    • data

      Connection data​(String... keyvals)
      Add one or more request key, val data parameter pairs.

      Multiple parameters may be set at once, e.g.: .data("name", "jsoup", "language", "Java", "language", "English"); creates a query string like: ?name=jsoup&language=Java&language=English

      For GET requests, data parameters will be sent on the request query string. For POST (and other methods that contain a body), they will be sent as body form parameters, unless the body is explicitly set by requestBody(String), in which case they will be query string parameters.

      Parameters:
      keyvals - a set of key value pairs.
      Returns:
      this Connection, for chaining

    • data

      @Nullable Connection.KeyVal data​(String key)
      Get the data KeyVal for this key, if any
      Parameters:
      key - the data key
      Returns:
      null if not set

    • requestBody

      Connection requestBody​(String body)
      Set a POST (or PUT) request body. Useful when a server expects a plain request body, not a set for URL encoded form key/value pairs. E.g.: 
      Jsoup.connect(url)
 .requestBody(json)
 .header("Content-Type", "application/json")
 .post();
       If any data key/vals are supplied, they will be sent as URL query params.
      Returns:
      this Request, for chaining

    • header

      Connection header​(String name, String value)
      Set a request header.
      Parameters:
      name - header name
      value - header value
      Returns:
      this Connection, for chaining
      See Also:
      Connection.Base.headers()

    • headers

      Connection headers​(Map<String,​String> headers)
      Adds each of the supplied headers to the request.
      Parameters:
      headers - map of headers name -> value pairs
      Returns:
      this Connection, for chaining
      See Also:
      Connection.Base.headers()

    • cookie

      Connection cookie​(String name, String value)
      Set a cookie to be sent in the request.
      Parameters:
      name - name of cookie
      value - value of cookie
      Returns:
      this Connection, for chaining

    • cookies

      Connection cookies​(Map<String,​String> cookies)
      Adds each of the supplied cookies to the request.
      Parameters:
      cookies - map of cookie name -> value pairs
      Returns:
      this Connection, for chaining

    • cookieStore

      Connection cookieStore​(CookieStore cookieStore)
      Provide a custom or pre-filled CookieStore to be used on requests made by this Connection.
      Parameters:
      cookieStore - a cookie store to use for subsequent requests
      Returns:
      this Connection, for chaining
      Since:
      1.14.1

    • cookieStore

      CookieStore cookieStore()
      Get the cookie store used by this Connection.
      Returns:
      the cookie store
      Since:
      1.14.1

    • parser

      Connection parser​(Parser parser)
      Provide an alternate parser to use when parsing the response to a Document. If not set, defaults to the HTML parser, unless the response content-type is XML, in which case the XML parser is used.
      Parameters:
      parser - alternate parser
      Returns:
      this Connection, for chaining

    • postDataCharset

      Connection postDataCharset​(String charset)
      Sets the default post data character set for x-www-form-urlencoded post data
      Parameters:
      charset - character set to encode post data
      Returns:
      this Connection, for chaining

    • get

      Document get() throws IOException
      Execute the request as a GET, and parse the result.
      Returns:
      parsed Document
      Throws:
      MalformedURLException - if the request URL is not a HTTP or HTTPS URL, or is otherwise malformed
      HttpStatusException - if the response is not OK and HTTP response errors are not ignored
      UnsupportedMimeTypeException - if the response mime type is not supported and those errors are not ignored
      SocketTimeoutException - if the connection times out
      IOException - on error

    • post

      Document post() throws IOException
      Execute the request as a POST, and parse the result.
      Returns:
      parsed Document
      Throws:
      MalformedURLException - if the request URL is not a HTTP or HTTPS URL, or is otherwise malformed
      HttpStatusException - if the response is not OK and HTTP response errors are not ignored
      UnsupportedMimeTypeException - if the response mime type is not supported and those errors are not ignored
      SocketTimeoutException - if the connection times out
      IOException - on error

    • execute

      Connection.Response execute() throws IOException
      Execute the request.
      Returns:
      a response object
      Throws:
      MalformedURLException - if the request URL is not a HTTP or HTTPS URL, or is otherwise malformed
      HttpStatusException - if the response is not OK and HTTP response errors are not ignored
      UnsupportedMimeTypeException - if the response mime type is not supported and those errors are not ignored
      SocketTimeoutException - if the connection times out
      IOException - on error

    • request

      Connection.Request request()
      Get the request object associated with this connection
      Returns:
      request

    • request

      Connection request​(Connection.Request request)
      Set the connection's request
      Parameters:
      request - new request object
      Returns:
      this Connection, for chaining

    • response

      Connection.Response response()
      Get the response, once the request has been executed.
      Returns:
      response
      Throws:
      IllegalArgumentException - if called before the response has been executed.

    • response

      Connection response​(Connection.Response response)
      Set the connection's response
      Parameters:
      response - new response
      Returns:
      this Connection, for chaining