Built-ins for strings

These built-ins act on a string left-value. However, if the left-value is number or date/time/date-time or boolean (since 2.3.20), it will automatically converted to string according the current number-, date/time/date-time- and boolean-format settings (which are the same formatters that are applied when inserting such values with ${...}).

boolean

The string converted to boolean value. The string must be true or false (case sensitive!), or must be in the format specified by the boolean_format setting.

If the string is not in the appropriate format, an error will abort template processing when you try to access this built-in.

cap_first

The string with the very first word of the string capitalized. For the precise meaning of "word" see the word_list built-in. Example:

${"  green mouse"?cap_first}
${"GreEN mouse"?cap_first}
${"- green mouse"?cap_first}

The output:

  Green mouse
GreEN mouse
- green mouse

In the case of "- green mouse", the first word is the -.

capitalize

The string with all words capitalized. For the precise meaning of "word" see the word_list built-in. Example:

${"  green  mouse"?capitalize}
${"GreEN mouse"?capitalize}

The output:

  Green Mouse
Green Mouse

chop_linebreak

The string without the line-break at its very end if there was a line-break, otherwise the unchanged string.

contains

Returns if the substring specified as the parameter to this built-in occurrs in the string. For example:

<#if "piceous"?contains("ice")>It contains "ice"</#if>

This will output:

It contains "ice"

date, time, datetime

The string value converted to a date, time, or date-time value. It will expect the format specified by the date_format, time_format and datetime_format settings. If the string is not in the appropriate format, an error will abort template processing when you try to access this built-in.

<#-- The date_format, time_format and datetime_format settings must match this format! -->
<#assign someDate = "Oct 25, 1995"?date>
<#assign someTime = "3:05:30 PM"?time>
<#assign someDatetime = "Oct 25, 1995 03:05:00 PM"?datetime>

<#-- Changing the setting value changes the expected format: -->
<#setting datetime_format="iso">
<#assign someDatetime = "1995-10-25T15:05"?datetime>

You can also specify the format explicitly like ?datetime.format (and hence also as ?datetime["format"]) or ?datetime("format"); these three forms do the same. The format can be specified similarly with ?date and ?time too. For the syntax and meaning of format values see the possible values of the date_format, time_format and datetime_format settings. Example:

<#-- Parsing XML Schema xs:date, xs:time and xs:dateTime values: -->
<#assign someDate = "1995-10-25"?date.xs>
<#assign someTime = "15:05:30"?time.xs>
<#assign someDatetime = "1995-10-25T15:05:00"?datetime.xs>

<#-- Parsing ISO 8601 (both extended and basic formats): -->
<#assign someDatetime = "1995-10-25T15:05"?datetime.iso>
<#assign someDatetime = "19951025T1505"?datetime.iso>

<#-- Parsing with SimpleDateFormat patterns: -->
<#assign someDate = "10/25/1995"?date("MM/dd/yyyy")>
<#assign someTime = "15:05:30"?time("HH:mm:ss")>
<#assign someDatetime = "1995-10-25 03:05 PM"?datetime("yyyy-MM-dd hh:mm a")>

<#-- Parsing with custom date formats: -->
<#assign someDatetime = "October/25/1995 03:05 PM"?datetime.@worklog>

To prevent misunderstandings, the left-hand value need not be a string literal. For example, when you read data from XML DOM (from where all values come as unparsed strings), you may do things like order.confirmDate?date.xs to convert the string value to a real date.

Of course, the format also can be a variable, like in "..."?datetime(myFormat).

Note that since 2.3.24, these built-ins can also be called with 0 arguments, like ?date(). It's almost the same as just writing ?date. The difference is highly technical and rarely matters: ?date() and such returns exactly the same Java object that the date parser (freemarker.core.TemplateDateFormat implementation) returns, while ?date without the () returns a tricky wrapper value that's a date and a method and hash on the same time.

ends_with

Returns whether this string ends with the substring specified in the parameter. For example "ahead"?ends_with("head") returns boolean true. Also, "head"?ends_with("head") will return true.

ensure_ends_with

If the string doesn't end with the substring specified as the 1st parameter, it adds it after the string, otherwise it returns the original string. For example, both "foo"?ensure_ends_with("/") and "foo/"?ensure_ends_with("/") returns "foo/".

ensure_starts_with

If the string doesn't start with the substring specified as the 1st parameter, it adds it before the string, otherwise it returns the original string. For example, both "foo"?ensure_starts_with("/") and "/foo"?ensure_starts_with("/") returns "/foo".

If you specify two parameters, then the 1st parameter is interpreted as a Java regular expression, and if it doesn't match the beginning of the string, then the string specified as the 2nd parameter is added before the string. For example someURL?ensure_starts_with("[a-zA-Z]+://", "http://") will check if the string starts with something that matches "[a-zA-Z]+://" (note that no ^ is needed), and if it doesn't, it prepends "http://".

This method also accepts a 3rd flags parameter. As calling with 2 parameters implies "r" there (i.e., regular expression mode), you rarely need this. One notable case is when you don't want the 1st parameter to be interpreted as a regular expression, only as plain text, but you want the comparison to be case-insensitive, in which case you would use "i" as the 3rd parameter.

esc

Escapes the value with the current output format, and prevents the auto-escaping of the returned value (to avoid double escaping). Because of auto-escaping, you usually only need this where auto-escaping was disabled:

<#ftl output_format="HTML" auto_esc=false>
<#assign s = "R&D">
${s}
${s?esc}

R&D
R&D

In templates, where auto-escaping is on, using it is redundant:

<#ftl output_format="HTML">
<#assign s = "R&D">
${s}
${s?esc} <#-- ?esc is redundant here -->

R&D
R&D

This built-in works by converting the string value to a markup output value, by escaping the string with the current output format, and using the result as the markup. The resulting markup output value belongs to the current output format at the point of the invocation.

This built-in can also be applied on markup output values, which it will bypass without change, as far as the input markup output value belongs to the current output format. If it doesn't, then the markup has to be converted to the current output format, which currently (as of 2.3.24) will be only successful if that value was created by escaping plain text (usually, with ?esc).

This built-in can't be used where the current output format is a non-markup output format. An attempt to do so will cause a parse-time error.

This built-in is not related to the deprecated escape and noescape directives. In fact, the parser will prevent using them on the same place, to prevent confusion.

groups

This is used only with the result of the matches built-in. See there...

html (deprecated)

The string as HTML markup. That is, the string with all:

• < replaced with <
• > replaced with >
• & replaced with &
• " replaced with "
• ' is replaced with ' if the programmers has set the incompatible_improvements setting to 2.3.24 or higher (also if it's set to 2.3.20 or higher and you are outside a string literal). Otherwise ' won't be replaced, so you must use quotation mark (", not ') to quote attribute values where you want to insert a value safely.

<input type=text name=user value="${user?html}">

Note that in HTML pages usually you want to use this built-in for all interpolations. You can spare a lot of typing and lessen the chances of accidental mistakes by using the escape directive.

index_of

Returns the index within this string of the first occurrence of the specified substring. For example, "abcabc"?index_of("bc") will return 1 (don't forget that the index of the first character is 0). Also, you can specify the index to start the search from: "abcabc"?index_of("bc", 2) will return 4. There is no restriction on the numerical value of the second parameter: if it is negative, it has the same effect as if it were zero, and if it is greater than the length of this string, it has the same effect as if it were equal to the length of this string. Decimal values will be truncated to integers.

If the 1st parameter does not occur as a substring in this string (starting from the given index, if you use the second parameter), then it returns -1.

j_string

Escapes the string with the escaping rules of Java language string literals, so it's safe to insert the value into a string literal. Note that it will not add quotation marks around the inserted value; you meant to use this inside the string literal.

All characters under UCS code point 0x20 will be escaped. When they have no dedicated escape sequence in the Java language (like \n, \t, etc.), they will be replaced with a UNICODE escape (\uXXXX).

Example:

<#assign beanName = 'The "foo" bean.'>
String BEAN_NAME = "${beanName?j_string}";

will output:

String BEAN_NAME = "The \"foo\" bean.";

js_string

Escapes the string with the escaping rules of JavaScript language string literals, so it's safe to insert the value into a string literal. Note that it will not add quotation marks around the inserted value; you meant to use this inside the string literal.

Example:

<#assign user = "Big Joe's \"right hand\"">
<script>
  alert("Welcome ${user?js_string}!");
</script>

will output:

<script>
  alert("Welcome Big Joe\'s \"right hand\"!");
</script>

The exact escaping rules are:

• " is escaped as \"

• ' is escaped as \'

• \ is escaped as \\

• / is escaped as \/ if the / is directly after < in the escaped string, or if it's at the beginning of the escaped string

• > is escaped as \> if the > is directly after ]] or -- in the escaped string, or if it's at the beginning of the escaped string, or if there's only a ] or - before it at the beginning of the escaped string

• < is escaped as \u003C if it's followed by ? or ! in the escaped string, or if it's at the end of the escaped string

• Control characters in UCS code point ranges U+0000...U+001f and U+007f...U+009f are escaped as \r, \n, etc., or as \xXX where there's no special escape for them in JavaScript.

• Control characters with UCS code point U+2028 (Line separator) and U+2029 (Paragraph separator) are escaped as \uXXXX, as they are source code line-breaks in ECMAScript.

json_string

Escapes the string with the escaping rules of JSON language string literals, so it's safe to insert the value into a string literal. Note that it will not add quotation marks around the inserted value; you meant to use this inside the string literal.

This will not escape ' characters, since JSON strings must be quoted with ".

The escaping rules are almost identical to those documented for js_string. The differences are that ' is not escaped at all, that > is escaped as \u003E (not as \>), and that \uXXXX escapes are used instead of \xXX escapes.

keep_after

Removes the part of the string that is not after the first occurrence of the given substring. For example:

${"abcdefgh"?keep_after("de")}

will print

fgh

If the parameter string is not found, it will return an empty string. If the parameter string is a 0-length string, it will return the original string unchanged.

This method accepts an optional flags parameter, as its 2nd parameter:

${"foo : bar"?keep_after(r"\s*:\s*", "r")}

will print

bar

keep_after_last

Same as keep_after, but keeps the part after the last occurrence of the parameter, rather than after the first. Example:

${"foo.bar.txt"?keep_after_last(".")}

will print

txt

while with keep_after you would get bar.txt.

keep_before

Removes the part of the string that starts with the given substring. For example:

${"abcdef"?keep_before("de")}

will print

abc

If the parameter string is not found, it will return the original string unchanged. If the parameter string is a 0-length string, it will return an empty string.

This method accepts an optional flags parameter, as its 2nd parameter:

${"foo : bar"?keep_before(r"\s*:\s*", "r")}

will print

foo

keep_before_last

Same as keep_before, but keeps the part before the last occurrence of the parameter, rather than after the first. Example:

${"foo.bar.txt"?keep_before_last(".")}

will print

foo.bar

while with keep_before you would get foo.

last_index_of

Returns the index within this string of the last (rightmost) occurrence of the specified substring. It returns the index of the first (leftmost) character of the substring. For example: "abcabc"?last_index_of("ab") will return 3. Also, you can specify the index to start the search from. For example, "abcabc"?last_index_of("ab", 2) will return 0. Note that the second parameter indicates the maximum index of the start of the substring. There is no restriction on the numerical value of the second parameter: if it is negative, it has the same effect as if it were zero, and if it is greater than the length of this string, it has the same effect as if it were equal to the length of this string. Decimal values will be truncated to inegers.

If the 1st parameter does not occur as a substring in this string (before the given index, if you use the second parameter), then it returns -1.

left_pad

If it's used with 1 parameter, then it inserts spaces on the beginning of the string until it reaches the length that is specified as the parameter. If the string is already as long or longer than the specified length, then it does nothing. For example, this:

[${""?left_pad(5)}]
[${"a"?left_pad(5)}]
[${"ab"?left_pad(5)}]
[${"abc"?left_pad(5)}]
[${"abcd"?left_pad(5)}]
[${"abcde"?left_pad(5)}]
[${"abcdef"?left_pad(5)}]
[${"abcdefg"?left_pad(5)}]
[${"abcdefgh"?left_pad(5)}]

will output this:

[     ]
[    a]
[   ab]
[  abc]
[ abcd]
[abcde]
[abcdef]
[abcdefg]
[abcdefgh]

If it's used with 2 parameters, then the 1st parameter means the same as if you were using the built-in with only 1 parameter, and the second parameter specifies what to insert instead of space characters. For example:

[${""?left_pad(5, "-")}]
[${"a"?left_pad(5, "-")}]
[${"ab"?left_pad(5, "-")}]
[${"abc"?left_pad(5, "-")}]
[${"abcd"?left_pad(5, "-")}]
[${"abcde"?left_pad(5, "-")}]

will output this:

[-----]
[----a]
[---ab]
[--abc]
[-abcd]
[abcde]

The 2nd parameter can be a string whose length is greater than 1. Then the string will be inserted periodically, for example:

[${""?left_pad(8, ".oO")}]
[${"a"?left_pad(8, ".oO")}]
[${"ab"?left_pad(8, ".oO")}]
[${"abc"?left_pad(8, ".oO")}]
[${"abcd"?left_pad(8, ".oO")}]

will output this:

[.oO.oO.o]
[.oO.oO.a]
[.oO.oOab]
[.oO.oabc]
[.oO.abcd]

The 2nd parameter must be a string value, and it must be at least 1 character long.

length

The number of characters in the string.

lower_case

The lower case version of the string. For example "GrEeN MoUsE"?lower_case will be "green mouse".

matches

This is a "power user" built-in. Ignore it if you don't know regular expressions.

This built-in determines if the string exactly matches the pattern. Also, it returns the list of matching sub-strings. The return value is a multi-type value:

• Boolean: true, if it the entire string matches the pattern, otherwise false. For example, "fooo"?matches('fo*') is true, but "fooo bar"?matches('fo*') is false.

• Sequence: the list of matched substrings of the string. Possibly a 0 length sequence.

For example:

<#if "fxo"?matches("f.?o")>Matches.<#else>Does not match.</#if>

<#assign res = "foo bar fyo"?matches("f.?o")>
<#if res>Matches.<#else>Does not match.</#if>
Matching sub-strings:
<#list res as m>
- ${m}
</#list>

will print:

Matches.

Does not match.
Matching sub-strings:
- foo
- fyo

If the regular expression contains groups (parentheses), then you can access them with the groups built-in:

<#-- Entire input match -->
<#assign res = "John Doe"?matches(r"(\w+) (\w+)")>
<#if res> <#-- Must not try to access groups if there was no match! -->
  First name: ${res?groups[1]}
  Second name: ${res?groups[2]}
</#if>

<#-- Subtring matches -->
<#assign res = "aa/rx; ab/r;"?matches("(.+?)/*(.+?);")>
<#list res as m>
  - "${m}" is "${m?groups[1]}" per "${m?groups[2]}"
</#list>

This will print:

  First name: John
  Second name: Doe

  - "aa/rx;" is "a" per "a/rx"
  - " ab/r;" is " " per "ab/r"

Notes regarding the behavior of the groups built-in:

• It works both with substring matches and with the result of entire string matching (as it was shown in the above example)

• The first item in the sequence that groups returns is the whole substring matched by the regular expression. Hence, the index of the first explicit regular expression group (with other words, of the first (...) in the regular expression) is 1, and not 0. Also, because of this, the size of the sequence is one more than the number of explicit regular expression groups.

• The size of the sequence returned by groups only depends on the number of explicit groups in the regular expression, and so it will be the same (non-0) even if there was no match found for the regular expression. Attempting to access an item of the sequence (as in res?groups[1]) when there was match will cause an error. Thus, before accessing the groups, you should always check if there was any match (as in <#if res>access the groups here</#if>).

• When there's a match for the regular expression, but not for a certain explicit group inside the regular expression, then for that group the sequence will contain a 0 length string. So accessing a group that matches nothing is safe, as far as the containing regular expression has matched something.

matches accepts an optional 2nd parameter, the flags. Note that it doesn't support flag f, and ignores the r flag.

no_esc

Prevents the auto-escaping of a value. For example:

<#ftl output_format="HTML">
<#assign s = "<b>Test</b>">
${s}
${s?no_esc}

<b>Test</b>
<b>Test</b>

This works by converting the string value to a markup output value, which uses the string as the markup as is, and belongs to the current output format at the point of the invocation.

This built-in can also be applied on markup output values, which it will bypass without change, as far as the input markup output value belongs to current output format. If it doesn't, then the markup has to be converted to the current output format, which currently (as of 2.3.24) will be only successful if that value was created by escaping plain text (usually, with ?esc).

This built-in can't be used where the current output format is a non-markup output format. An attempt to do so will cause a parse-time error.

This built-in is not related to the deprecated escape and noescape directives. In fact, the parser will prevent using them on the same place, to prevent confusion.

number

The string converted to numerical value. The number must be in "computer language" format. That is, it must be in the locale independent form, where the decimal separator is dot, and there's no grouping.

This built-in recognizes numbers in the format that the FreeMarker template language uses. In additionally, it recognizes scientific notation (e.g. "1.23E6", "1.5e-8"). Since FreeMarker 2.3.21, it also recognizes all XML Schema number formats, like NaN, INF, -INF, plus the Java-native formats Infinity and -Infinity.

If the string is not in the appropriate format, an error will abort template processing when you try to access this built-in.

In fact, the string is parsed by the toNumber method of the current arithmetic_engine, which is configuration setting. However, that method should behave similarly as described above.

replace

It is used to replace all occurrences of a string in the original string with another string. It does not deal with word boundaries. For example:

${"this is a car acarus"?replace("car", "bulldozer")}

will print:

this is a bulldozer abulldozerus

The replacing occurs in left-to-right order. This means that this:

${"aaaaa"?replace("aaa", "X")}

will print:

Xaa

If the 1st parameter is an empty string, then all occurrences of the empty string will be replaced, like "foo"?replace("","|") will evaluate to "|f|o|o|".

replace accepts an optional flags parameter, as its 3rd parameter.

right_pad

This is the same as left_pad, but it inserts the characters at the end of the string instead of the beginning of the string.

Example:

[${""?right_pad(5)}]
[${"a"?right_pad(5)}]
[${"ab"?right_pad(5)}]
[${"abc"?right_pad(5)}]
[${"abcd"?right_pad(5)}]
[${"abcde"?right_pad(5)}]
[${"abcdef"?right_pad(5)}]
[${"abcdefg"?right_pad(5)}]
[${"abcdefgh"?right_pad(5)}]

[${""?right_pad(8, ".oO")}]
[${"a"?right_pad(8, ".oO")}]
[${"ab"?right_pad(8, ".oO")}]
[${"abc"?right_pad(8, ".oO")}]
[${"abcd"?right_pad(8, ".oO")}]

This will output this:

[     ]
[a    ]
[ab   ]
[abc  ]
[abcd ]
[abcde]
[abcdef]
[abcdefg]
[abcdefgh]

[.oO.oO.o]
[aoO.oO.o]
[abO.oO.o]
[abc.oO.o]
[abcdoO.o]

remove_beginning

Removes the parameter substring from the beginning of the string, or returns the original string if it doesn't start with the parameter substring. For example:

${"abcdef"?remove_beginning("abc")}
${"foobar"?remove_beginning("abc")}

will print:

def
foobar

remove_ending

Removes the parameter substring from the ending of the string, or returns the original string if it doesn't end with the parameter substring. For example:

${"abcdef"?remove_ending("def")}
${"foobar"?remove_ending("def")}

will print:

abc
foobar

rtf (deprecated)

The string as Rich text (RTF text). That is, the string with all:

• \ replaced with \\

• { replaced with \{

• } replaced with \}

split

It is used to split a string into a sequence of strings along the occurrences of another string. For example:

<#list "someMOOtestMOOtext"?split("MOO") as x>
- ${x}
</#list>

will print:

- some
- test
- text

Note that it is assumed that all occurrences of the separator is before a new item (except with "r" flag - see later), thus:

<#list "some,,test,text,"?split(",") as x>
- "${x}"
</#list>

will print:

- "some"
- ""
- "test"
- "text"
- ""

split accepts an optional flags parameter, as its 2nd parameter. There's a historical glitch with the r (regular expression) flag; it removes the empty elements from the end of the resulting list, so with ?split(",", "r") in the last example the last "" would be missing from the output.

If the 1st parameter is an empty string, the string will be split to characters (since FreeMarker 2.3.28 - earlier this has only worked with the r flag).

starts_with

Returns if this string starts with the specified substring. For example "redirect"?starts_with("red") returns boolean true. Also, "red"?starts_with("red") will return true.

string (when used with a string value)

Does nothing, just returns the string as-is. The exception is that if the value is a multi-type value (e.g. it is both string and sequence at the same time), then the resulting value will be only a simple string, not a multi-type value. This can be utilized to prevent the artifacts of multi-typing.

substring (deprecated)

Synopsis: exp?substring(from, toExclusive), also callable as exp?substring(from)

A substring of the string. from is the index of the first character. It must be a number that is at least 0 and less than or equal with toExclusive, or else an error will abort the template processing. The toExclusive is the index of the character position after the last character of the substring, or with other words, it is one greater than the index of the last character. It must be a number that is at least 0 and less than or equal to the length of the string, or else an error will abort the template processing. If the toExclusive is omitted, then it defaults to the length of the string. If a parameter is a number that is not an integer, only the integer part of the number will be used.

Example:

- ${'abc'?substring(0)}
- ${'abc'?substring(1)}
- ${'abc'?substring(2)}
- ${'abc'?substring(3)}

- ${'abc'?substring(0, 0)}
- ${'abc'?substring(0, 1)}
- ${'abc'?substring(0, 2)}
- ${'abc'?substring(0, 3)}

- ${'abc'?substring(0, 1)}
- ${'abc'?substring(1, 2)}
- ${'abc'?substring(2, 3)}

The output:

- abc
- bc
- c
-

-
- a
- ab
- abc

- a
- b
- c

trim

The string without leading and trailing white-space. Example:

(${"  green mouse  "?trim})

The output:

(green mouse)

truncate, truncate_...

Cuts off the end of a string if that's necessary to keep it under a the length given as parameter, and appends a terminator string ([...] by default) to indicate that the string was truncated. Example (assuming default FreeMarker configuration settings):

<#assign shortName='This is short'>
<#assign longName='This is a too long name'>
<#assign difficultName='This isoneveryverylongword'>

No truncation needed:
${shortName?truncate(16)} 

Truncated at word boundary:
${longName?truncate(16)}

Truncated at "character boundary":
${difficultName?truncate(16)}

No truncation needed:
This is short

Truncated at word boundary:
This is a [...]

Truncated at "character boundary":
This isonev[...]

Things to note above:

• The string is returned as is if its length doesn't exceed the specified length (16 in this case).

• When the string exceeded that length, its end was cut off in a way so that together with the added terminator string ([...] here) its length won't exceed 16. The result length is possibly shorter than 16, for the sake of better look (see later). Actually, the result length can also be longer than the parameter length, when the desired length is shorter than the terminator string alone, in which case the terminator is still returned as is. Also, an algorithms other than the default might choses to return a longer string, as the length parameter is in principle just hint for the desired visual length.

• truncate prefers cutting at word boundary, rather than mid-word, however, if doing so would give a result that's shorter than the 75% of the length specified with the argument, it falls back to cut mid-word. In the last line of the above example, "This [...]" would be too short (11 < 16 * 75%), so it was cut mid-word instead.

• If the cut happened at word boundary, there's a space between the word end and the terminator string, otherwise there's no space between them. Only whitespace is treated as word separator, not punctuation, so this generally gives intuitive results.

Adjusting truncation rules

Truncation rules are highly configurable by setting the truncate_builtin_algorithm configuration setting. This can be done by the programmers, not template authors, so for more details and examples please see the JavaDoc of Configurable.setTruncateBuiltinAlgorithm.

Truncation rules can also be influenced right in the template to a smaller extent:

• Specifying if the truncation should happen at word boundary or not:

  • truncate_w will always truncate at word boundary. For example, difficultName?truncate_w(16) returns "This [...]", rather than "This isonev[...]" (as saw in earlier example).

  • truncate_c will truncate at any character, not just at word ends. For example, longName?truncate_c(16) returns "This is a t[...]", rather than "This is a [...]" (as saw in earlier example). This tends to give a string length closer to the length specified, but still not an exact length, as it removes white-space before the terminator string, and re-adds a space if we are just after the end of a word, etc.

• Specifying the terminator string (instead of relying on its default): truncate and all truncate_... built-ins have an additional optional parameter for it. After that, a further optional parameter can specify the assumed length of the terminator string (otherwise its real length will be used). If you find yourself specifying the terminator string often, then certainly the defaults should be configured instead (via truncate_builtin_algorithm configuration - see earlier). Example:

  Template

  ${longName?truncate(16, '...')}
  ${longName?truncate(16, '...', 1)}

  Output

  This is a ...
  This is a too ...

  When the terminator string starts with dot (.) or ellipsis (…), the default algorithm will remove the dots and ellipses that the terminator touches, to prevent ending up with more than 3 dots at the end:

  Template

  ${'Foo bar.baaz'?truncate(11, '---')}
  ${'Foo bar.baaz'?truncate(11, '...')} (Not "Foo bar....")
  ${'Fo bar. baaz'?truncate(11, '...')} (Word separator space prevents touching)

  Output

  Foo bar.---
  Foo bar... (Not "Foo bar....")
  Fo bar. ... (Word separator space prevents touching)

Using markup as terminator string

Each truncation built-in has a variation whose name ends with _m (for markup). These allow using markup (like HTML) as terminator, which is useful if you want the terminator to be styled differently than the truncated text. By default the markup terminator is <span class='truncateTerminator'>[&#8230;]</span>, (where … prints an ellipsis character), but of course this can be changed with the truncate_builtin_algorithm configuration setting (see earlier). Example (see the variables used in earlier example):

${longName?truncate_m(16)}
${difficultName?truncate_w_m(16)}
${longName?truncate_c_m(16)}

This is a <span class='truncateTerminator'>[&#8230;]</span>
This <span class='truncateTerminator'>[&#8230;]</span>
This is a to<span class='truncateTerminator'>[&#8230;]</span>

Note above that the terminator string was considered to be only 3 characters long ('[', '…', ']') by the truncation built-ins, because inside the terminator string they only count the characters outside HTML/XML tags and comments, and they can also interpret numeric character references (but not other entity references). (The same applies when they decide if the terminator starts with dot or ellipsis; preceding tags/comments are skipped, etc.)

If a markup terminator is used (like above), the return value of the truncate..._m built-in will be markup as well, which means that auto-escaping won't escape it. Of course, the content of the truncated string itself will be still auto-escaped:

<#ftl output_format='HTML'>
${'This is auto-escaped: <span>'}
${'This is auto-escaped: <span>, but not the terminator string'?truncate_m(41)}

This is auto-escaped: <span>
This is auto-escaped: &lt;span&gt;, but not <span class='truncateTerminator'>[&#8230;]</span>

uncap_first

The opposite of cap_first. The string with the very first word of the string un-capitalized.

upper_case

The upper case version of the string. For example "GrEeN MoUsE" will be "GREEN MOUSE".

url

The string after URL escaping. This means that all non-US-ASCII and reserved URL characters will be escaped with %XX. For example:

<#assign x = 'a/b c'>
${x?url}

The output will be (assuming that the charset used for the escaping is an US-ASCII compatible charset):

a%2Fb%20c

Note that it escapes all reserved URL characters (/, =, &, ...etc), so this encoding can be used for encoding query parameter values, for example:

<a href="foo.cgi?x=${x?url}&y=${y?url}">Click here...</a>

To do URL escaping a charset must be chosen that will be used for calculating the escaped parts (%XX). If you are HTML page author and you don't really understand this, don't worry: the programmers should configure FreeMarker so that it uses the proper charset by default (programmers: see more below...). If you are a more technical minded user, then you may want to know that the charset used is specified by the url_escaping_charset setting, that can be set in template execution time (or, preferably, earlier by the programmers). For example:

<#--
  This will use the charset specified by the programmers
  before the template execution has started.
-->
<a href="foo.cgi?x=${x?url}">foo</a>

<#-- Use UTF-8 charset for URL escaping from now: -->
<#setting url_escaping_charset="UTF-8">

<#-- This will surely use UTF-8 charset -->
<a href="bar.cgi?x=${x?url}">bar</a>

Furthermore, you can explicitly specify a charset for a single URL escaping as the parameter to the built-in:

<a href="foo.cgi?x=${x?url('ISO-8895-2')}">foo</a>

If the url built-in has no parameter, then it will use the charset specified as the value of the url_escaping_charset setting. This setting should be set by the software that encloses FreeMarker (e.g. a Web application framework), because it is not set (null) by default. If it is not set, then FreeMarker falls back using the value of the output_encoding setting, which is also not set by default, so it is again the task of the enclosing software. If the output_encoding setting is not set either, then the parameterless url built-in can't be executed, and it will cause execution time error. Of course, the url built-in with parameter always works.

It's possible to set url_escaping_charset in the template with the setting directive, but it is bad practice, at least in true MVC applications. The output_encoding setting can't be set with the setting directive, so that's surely the task of the enclosing software. You may find more information regarding this here...

url_path

This is the same as the url built-in, except that it doesn't escape slash (/) characters. This meant to be used for converting paths (like paths coming from the OS or some content repository) that use slash (not backslash!) to a path the can be inserted into an URL. The most common reason why this conversion is needed is that folder names or file names might contain non-US-ASCII letters ("national" characters).

word_list

A sequence that contains all words of the string in the order as they appear in the string. Words are continual character sequences that contain any character but white-space. Example:

<#assign words = "   a bcd, .   1-2-3"?word_list>
<#list words as word>[${word}]</#list>

will output:

[a][bcd,][.][1-2-3]

xhtml (deprecated)

The string as XHTML text. That is, the string with all:

• < replaced with <
• > replaced with >
• & replaced with &
• " replaced with "
• ' replaced with '

The only difference between this built-in and the xml built-in is that the xhtml built-in escapes ' as ' instead of as ', because some older browsers don't know '.

xml (deprecated)

The string as XML text. That is, the string with all:

• < replaced with <
• > replaced with >
• & replaced with &
• " replaced with "
• ' replaced with '

Common flags

Many string built-ins accept an optional string parameter, the so called "flags". In this string, each letter influences a certain aspect of the behavior of the built-in. For example, letter i means that the built-in should not differentiate the lower and upper-case variation of the same letter. The order of the letters in the flags string is not significant.

This is the complete list of letters (flags):

• i: Case insensitive: do not differentiate the lower and upper-case variation of the same letter.

• f: First only. That is, replace/find/etc. only the first occurrence of something.

• r: The substring to find is a regular expression. FreeMarker uses the variation of regular expressions described at http://docs.oracle.com/javase/7/docs/api/java/util/regex/Pattern.html (note that the presence of some pattern features depends on the Java version used).

• m: Multi-line mode for regular expressions. In multi-line mode the expressions ^ and $ match just after or just before, respectively, a line terminator or the end of the string. By default these expressions only match at the beginning and the end of the entire string. Note that ^ and $ doesn't match the line-break character itself.

• s: Enables dot-all mode for regular expressions (same as Perl singe-line mode). In dot-all mode, the expression . matches any character, including a line terminator. By default this expression does not match line terminators.

• c: Permits whitespace and comments in regular expressions.

Example:

<#assign s = 'foo bAr baar'>
${s?replace('ba', 'XY')}
i: ${s?replace('ba', 'XY', 'i')}
if: ${s?replace('ba', 'XY', 'if')}
r: ${s?replace('ba*', 'XY', 'r')}
ri: ${s?replace('ba*', 'XY', 'ri')}
rif: ${s?replace('ba*', 'XY', 'rif')}

This outputs this:

foo bAr XYar
i: foo XYr XYar
if: foo XYr baar
r: foo XYAr XYr
ri: foo XYr XYr
rif: foo XYr baar

This is the table of built-ins that use these common flags, and which supports which flags: